Unboxing AEM Tru-Boostx 80PSIG Boost Controller Gauge

Unboxing the brand new AEM Tru-Boostx 80PSIG Boost Controller Gauge. Now available to order from www.titanmotorsports.com

Part# 30-0352

Program Two Boost Levels + Scramble Boost Setting

Change Wastegate Open Pressure

Display Boost Levels in PSIg (PSI), BAR or kPa (PAS)

Set Alarms and Display Peak Boost
Overboost Protection Built In

Integrated Error Protection

Datalog using AEMnet CAN bus
Internal 80 PSI MAP Sensor



A boost display gauge and boost controller in one!

Easy to program – no laptop required

Boost control solenoid and all necessary hardware included

On-board 80PSIg MAP sensor—no upgrade kit needed for high boost vehicles
.Two boost level settings and scramble boost setting
. Wastegate open pressure setting for controlling boost spikes and faster spool
. Display boost levels in PSI, BAR or kPa
.

Overboost protection and programmable alarms, ground output for optional LED warning light
. Peak boost level recall. X-Series design for the best visibility (87% larger center LED and 33% larger face design).
X-Series dimensions make it easier to install (0.825” overall depth, 0.20” cup depth)
. AEMnet CAN bus enabled for data logging (13 channels of data over 2-wire connection).


Standard 52mm (2-1/16”) cup
24 programmable green outer LEDs
Auto dimming sensor for ideal brightness day or night
. Positive locking connectors.
Optional silver bezel with white faceplate accessory kit (30-0352-ACC)

Gauge